特点
- 白色LCD,杰出的可视性
- function that connects 12 pcs of 1-preset counter in parallel is provided.
- built-in counter(12 pcs of counter, No.1 - 9, A, B, C) 可以通过前面板的键选择。
- Output is one and is common use for 12 pcs of built-in counter(OR output) It can check "count-up" for each counter with characteristic display.
- It can be used as total counter by setting preset value to 0.
- It can be prohibited to count by count-prohibition key in the front against unused counter.
规格
类型 |
Increment type preset counter | |||
型号 |
DC-JM4-AW |
DC-JM4-DW |
DC-JM6-AW |
DC-JM6-DW |
电源 |
100 to 240VAC |
24VDC |
100 to 240VAC |
24VDC |
Fluctuation range |
±10% 当24VDC时, 85 - 250VAC | |||
消耗电力 |
4VA*1(240VAC时) |
1W(24VDC时) |
4VA*1(240VAC时) |
1W(24VDC时) |
Built-in counter numbers |
12 | |||
Preset |
1 preset | |||
Output numbers |
1 输出(12 pcs of counter, OR output) | |||
Divider function |
|
1/100 | ||
记忆功能 |
EEP-ROM(重复写入 ≥10万次) | |||
计数速度 |
30Hz/5kHz切换 | |||
显示 |
7-段 LCD(LED背光) | |||
输入信号 |
接点 或集电极开路 | |||
输出 |
Transistor output(NPN open-collector) : 100mA or less, 40V or less | |||
控制输出 |
Transistor output(NPN open-collector) : 100mA or less, 40V or less | |||
给传感器供电 |
12VDC, 50mA*2 |
|
12VDC, 50mA*2 |
|
*1 包括外部电源。
*2 使用电源≤120VAC, 可以提供外部100mA。
外部尺寸
计数器
60→48 框(GZ00003)
Use this frame when using DC-J instead of our counter with 60×60 such as DC-NXB, DC-S series.
连接
AC 电源型 |
DC 电源型 |
Note)给传感器供电不提供. |
(注意)
1. | Don't use empty terminal as relay terminal. |
2. | Each input for counting and reset is common use for contact and transistor. Make a wiring with 2-core shield wire and metal as short as possible. Also, don't make a wiring with power and high voltage line etc. |
3. | Use solderless terminal for M3. |
4. | DC-J doesn't operate for approx. 2.5 sec after putting power source in. |
输入/输出 电路
输入(counting/counter No.choice) |
晶体管输出 |
|
|